European Union's Ball Bearing Market to Reach 352K Tons by 2035, Valued at $4.9B - News and Statistics - IndexBox

Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.

IndexBox has just published a new report: EU - Ball Bearings - Market Analysis, Forecast, Size, Trends And Insights.

The article discusses the rising demand for ball bearings in the European Union, forecasting a slight increase in market performance with a projected CAGR of +1.0% for volume and +1.6% for value from 2024 to 2035. By the end of 2035, the market volume is expected to reach 352K tons and the market value to reach $4.9B in nominal prices.

Driven by rising demand for ball bearing in the European Union, the market is expected to start an upward consumption trend over the next decade. The performance of the market is forecast to increase slightly, with an anticipated CAGR of +1.0% for the period from 2024 to 2035, which is projected to bring the market volume to 352K tons by the end of 2035.

In value terms, the market is forecast to increase with an anticipated CAGR of +1.6% for the period from 2024 to 2035, which is projected to bring the market value to $4.9B (in nominal wholesale prices) by the end of 2035.

In 2024, after two years of decline, there was significant growth in consumption of ball bearings, when its volume increased by 7.4% to 317K tons. Overall, consumption, however, recorded a perceptible shrinkage. The volume of consumption peaked at 425K tons in 2013; however, from 2014 to 2024, consumption failed to regain momentum.

The size of the ball bearing market in the European Union amounted to $4.1B in 2024, with an increase of 14% against the previous year. This figure reflects the total revenues of producers and importers (excluding logistics costs, retail marketing costs, and retailers' margins, which will be included in the final consumer price). Over the period under review, consumption, however, recorded a perceptible shrinkage. Over the period under review, the market hit record highs at $6.5B in 2014; however, from 2015 to 2024, consumption failed to regain momentum.

The countries with the highest volumes of consumption in 2024 were Italy (68K tons), Germany (68K tons) and France (31K tons), together comprising 53% of total consumption.

From 2013 to 2024, the biggest increases were recorded for Italy (with a CAGR of +4.3%), while consumption for the other leaders experienced more modest paces of growth.

In value terms, Italy ($886M), Germany ($781M) and France ($477M) constituted the countries with the highest levels of market value in 2024, with a combined 52% share of the total market. Spain, Hungary, the Netherlands, Poland, Belgium, the Czech Republic and Denmark lagged somewhat behind, together accounting for a further 32%.

Hungary, with a CAGR of +4.8%, recorded the highest growth rate of market size in terms of the main consuming countries over the period under review, while market for the other leaders experienced more modest paces of growth.

The countries with the highest levels of ball bearing per capita consumption in 2024 were Denmark (2,087 kg per 1000 persons), Hungary (1,249 kg per 1000 persons) and Italy (1,162 kg per 1000 persons).

From 2013 to 2024, the most notable rate of growth in terms of consumption, amongst the main consuming countries, was attained by Italy (with a CAGR of +4.5%), while consumption for the other leaders experienced more modest paces of growth.

In 2024, production of ball bearings was finally on the rise to reach 233K tons after two years of decline. In general, production, however, recorded a pronounced curtailment. The most prominent rate of growth was recorded in 2021 when the production volume increased by 14%. Over the period under review, production attained the peak volume at 346K tons in 2018; however, from 2019 to 2024, production failed to regain momentum.

In value terms, ball bearing production expanded markedly to $4B in 2024 estimated in export price. Overall, production, however, recorded a noticeable decrease. The growth pace was the most rapid in 2021 with an increase of 18%. Over the period under review, production hit record highs at $6.8B in 2014; however, from 2015 to 2024, production failed to regain momentum.

The countries with the highest volumes of production in 2024 were Italy (67K tons), Germany (34K tons) and France (29K tons), together comprising 56% of total production. Spain, Poland, Slovakia, Romania, Portugal, Hungary and Bulgaria lagged somewhat behind, together accounting for a further 33%.

From 2013 to 2024, the biggest increases were recorded for Spain (with a CAGR of +3.1%), while production for the other leaders experienced more modest paces of growth.

In 2024, supplies from abroad of ball bearings decreased by -25.2% to 264K tons, falling for the second year in a row after two years of growth. Overall, imports saw a pronounced setback. The pace of growth was the most pronounced in 2021 with an increase of 31% against the previous year. The volume of import peaked at 414K tons in 2022; however, from 2023 to 2024, imports stood at a somewhat lower figure.

In value terms, ball bearing imports declined significantly to $3.8B in 2024. In general, imports saw a perceptible setback. The growth pace was the most rapid in 2021 with an increase of 28% against the previous year. Over the period under review, imports reached the maximum at $5.5B in 2022; however, from 2023 to 2024, imports stood at a somewhat lower figure.

Germany was the main importing country with an import of around 79K tons, which amounted to 30% of total imports. Italy (31K tons) held the second position in the ranking, followed by the Netherlands (25K tons), France (20K tons), Belgium (18K tons), Spain (17K tons) and Denmark (13K tons). All these countries together held approx. 47% share of total imports. Poland (11K tons), the Czech Republic (9.7K tons) and Austria (5.8K tons) held a little share of total imports.

From 2013 to 2024, average annual rates of growth with regard to ball bearing imports into Germany stood at -3.6%. At the same time, Belgium (+12.2%) displayed positive paces of growth. Moreover, Belgium emerged as the fastest-growing importer imported in the European Union, with a CAGR of +12.2% from 2013-2024. Spain, Denmark and Poland experienced a relatively flat trend pattern. By contrast, the Netherlands (-1.0%), Italy (-2.0%), the Czech Republic (-3.3%), France (-4.1%) and Austria (-5.7%) illustrated a downward trend over the same period. From 2013 to 2024, the share of Belgium, Spain, the Netherlands and Denmark increased by +5.4, +2.2, +2 and +1.6 percentage points, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, Germany ($1.3B) constitutes the largest market for imported ball bearings in the European Union, comprising 33% of total imports. The second position in the ranking was taken by Italy ($391M), with a 10% share of total imports. It was followed by France, with a 10% share.

In Germany, ball bearing imports declined by an average annual rate of -3.4% over the period from 2013-2024. In the other countries, the average annual rates were as follows: Italy (-3.1% per year) and France (-3.3% per year).

The import price in the European Union stood at $14,578 per ton in 2024, waning by -2.6% against the previous year. Overall, the import price, however, recorded a relatively flat trend pattern. The most prominent rate of growth was recorded in 2023 an increase of 14%. As a result, import price attained the peak level of $14,966 per ton, and then reduced modestly in the following year.

Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was France ($19,395 per ton), while Denmark ($7,368 per ton) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by the Czech Republic (+2.3%), while the other leaders experienced more modest paces of growth.

In 2024, overseas shipments of ball bearings decreased by -36.8% to 180K tons, falling for the second consecutive year after two years of growth. Over the period under review, exports continue to indicate a pronounced contraction. The most prominent rate of growth was recorded in 2021 when exports increased by 14%. The volume of export peaked at 320K tons in 2018; however, from 2019 to 2024, the exports stood at a somewhat lower figure.

In value terms, ball bearing exports shrank remarkably to $4B in 2024. Overall, exports saw a noticeable setback. The most prominent rate of growth was recorded in 2021 with an increase of 21% against the previous year. The level of export peaked at $5.8B in 2023, and then shrank markedly in the following year.

In 2024, Germany (44K tons), distantly followed by Italy (30K tons), the Netherlands (18K tons), France (18K tons), Poland (13K tons) and Spain (11K tons) represented the main exporters of ball bearings, together making up 74% of total exports. Austria (7.3K tons), Belgium (6.3K tons), Slovakia (5.2K tons) and Romania (4.9K tons) held a minor share of total exports.

From 2013 to 2024, the biggest increases were recorded for Belgium (with a CAGR of +8.4%), while shipments for the other leaders experienced mixed trends in the exports figures.

In value terms, Germany ($1.5B) remains the largest ball bearing supplier in the European Union, comprising 37% of total exports. The second position in the ranking was held by Italy ($537M), with a 13% share of total exports. It was followed by France, with a 13% share.

In Germany, ball bearing exports plunged by an average annual rate of -1.4% over the period from 2013-2024. In the other countries, the average annual rates were as follows: Italy (-4.4% per year) and France (-5.9% per year).

The export price in the European Union stood at $22,267 per ton in 2024, with an increase of 9% against the previous year. Over the last eleven-year period, it increased at an average annual rate of +1.4%. The pace of growth appeared the most rapid in 2023 an increase of 14% against the previous year. The level of export peaked in 2024 and is expected to retain growth in the near future.

There were significant differences in the average prices amongst the major exporting countries. In 2024, amid the top suppliers, the country with the highest price was Germany ($33,060 per ton), while Spain ($9,108 per ton) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by Slovakia (+4.0%), while the other leaders experienced more modest paces of growth.

Source: IndexBox Market Intelligence Platform

This report provides an in-depth analysis of the ball bearing market in the EU. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.

This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:

While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.

Making Data-Driven Decisions to Grow Your Business

A Quick Overview of Market Performance

Understanding the Current State of The Market and Its Prospects

Finding New Products to Diversify Your Business

Choosing the Best Countries to Establish Your Sustainable Supply Chain

Choosing the Best Countries to Boost Your Exports

The Latest Trends and Insights into The Industry

The Largest Importers on The Market and How They Succeed

The Largest Exporters on The Market and How They Succeed

The Largest Producers on The Market and Their Profiles

The Largest Markets And Their Profiles